This is going to be one of the best resources available for you to learn more about plumbing. There might be a lot of resources available both on and offline, however, we have gathered the best information in this article and sorted out the obvious or incorrect advice that you may find elsewhere.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the mainline, and you must contact a professional to take care of this problem for you.

One way to avoid a common plumbing problem is to make sure never to flush anything but human waste and toilet paper down a toilet. Other things made of paper like tissues, paper towels, and the like do not dissolve the same way toilet paper does and can get stuck.

Ensure your toilet does not have any leaks. Drop a few food coloring drops inside your toilet tank to test for leaks. Look at the bowl carefully. If you notice colored water in several seconds, then you know your toilet is leaking badly, and you need to fix this as soon as possible.

Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.

Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.

When searching for a good plumber you should always check references. It is easy to just go with the lowest price, but you have to do your research and make sure the plumber has a good reputation with the people they have done work for in the past so you do not get a bad plumber.

Make sure to never leave any flammable liquids near your water heater. Certain liquids like gasoline, solvents, or adhesives are flammable, and if left too close to the water heater, can ignite. If you have to have these liquids in your basement, place it far away from your water heater.

Use a foaming root killer, twice yearly, to remove tree roots that can bring your drains to a standstill. Foaming products fill the entire pipe with chemicals, killing roots that grow from the top of the pipe as well as the part that water flows through. They are more effective than regular root killers for this reason.

Keep a grease vat in your kitchen to pour all used cooking grease into. Grease is a big reason that kitchen drains slow and eventually, stops up. Even the harshest drain cleaning products, tend to not be a match for a heavy grease clog. The grease you save in the vat can be formed into balls and rolled in bird seed for wonderful winter bird feeders.

Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit’s energy consumption. If you determine that the temperature is too high, adjust immediately to avoid any of these things from happening.

In conclusion, it is important that you know how to take care of plumbing, but it is more important that you get your data from a reliable source. Use the great advice provided here and you will be more than happy that you took the time to do so.