Plumbing is a lot more than just fixing a leak under the sink. It is truly a huge system that needs to be maintained. It has so many techniques and equipment that require research and hard work. Do you have what it takes? Regardless of your answer, here are some tips to help you.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Find a better way to discard cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or another metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Putting in shower heads that are energy-efficient can save you a lot of money in energy costs. Most of the hot water we use is used while we are showering. If you use energy-efficient heads for your showers, you can save hundreds each year on your bills.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

If you’ve got issues with your toilet blocking, see if the blockage exists at the branch line which connects the sewage and main lines. If you are unable to address this blockage on your own, you may require the services of a professional. The blockage will be cleared by running a snake throughout the line.

Now you see that plumbing is a lot more than haphazardly fixing a tiny leak. It takes skill and work. You don’t want to create more problems, so why not take some time to learn how to do it right? The above tips should have given you some pointers on how to do that.