Manage Your Plumbing Problems With These Tips
You need to have some knowledge of what to look for and expect from doing your own plumbing. You need to know what resources are available to you and who can provide you with answers as to what you need for your future plumbing jobs. The tips below can help you with how to start.
Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.
Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!
Periodically check your pipes for leaks and cracks. These can be forgotten since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.
In cold climate areas, sometimes the pipes in the plumbing system freeze. You can thaw them out without calling a plumber. Before beginning, this process, open the faucet and begin thawing closest to the faucet and then move down the line as sections thaw out. One method you can use is to wrap the pipe with a heavy towel or burlap and then pour hot water over it, set a bucket underneath to catch the water.
Prevention will save you money on plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over time. You can help prevent grease buildup by looking for a product on the market that will clean the grease out.
Make sure that any exposed pipes in your home are insulated, especially those found in crawl spaces on the outside walls of your home. This will help keep them from freezing and causing you tons of problems. Frozen pipes can often be devastating and leave you with problems that are expensive to fix and no water in the middle of winter.
While you may not always have your choice of plumbers, you can use the Internet to research and review plumbers in your area. Your insurance provider may contract with a specific plumber; if you are knowledgeable about the company’s past jobs and client reviews, you will be more prepared.
As you have seen in the above tips, there is a lot of knowledge you can acquire before starting to do your own plumbing and it’s this knowledge that can help you with your future plumbing jobs. Do everything you must to find out what you need to get started.
