Snake Away Your Plumbing Problems Today
You’ve done it. You’re ready to handle your home’s plumbing maintenance and repair. What perfect timing! You probably have tons of questions on how to start and what to do, but fear not, this article can help you. Listed below are some tips that will help you get started with your plumbing aspirations.
Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.
Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running, or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
Check for floor damage around your toilet. If the floor around your toilet feels softer than the rest of the floor in your bathroom, there’s damage you need to address. An easy way to test for floor softness is by straddling the toilet and shifting your weight. If the floor feels soft when you do this, you have floor damage. By noticing a problem early on, you can save yourself a bunch of money if you were to leave it alone.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice these things working.
If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.
Sometimes you have to make the choice between replacing or repairing. If you have an old appliance, that uses a lot of water or electricity, it may be best to replace it. Sure, it will cost more initially, but it will save you money in the long run. The other thing is, you can’t be sure how well a repair will work out, whereas with a new appliance you’ll at least get a guarantee.
Frozen pipes can do very extensive and expensive damage. Fortunately, such damage is easy to prevent. Find out if all of your outdoor pipes are properly insulated. When colder weather is approaching, disconnect your garden hoses and make sure the outside water fixtures are turned off. This can save some serious money on pipe repairs over time.
Everyone in your home should know where the main water shut-off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.
Now you should be much more prepared when it comes to plumbing. If you thought that you were ready before, well you should now be an expert! The tips that were given should have provided you with some advice that can help you get started with maintaining and fixing your own plumbing.