Nobody really wants to think about having a huge plumbing issue in their home that requires a plumber. That’s because it can get expensive and can ruin your floors and other items in your home if it gets out of hand. Never fear because you can learn to do your own to prevent such problems by following these tips below.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Keep a strainer over every drain in your house to prevent stray debris from clogging your pipes. Your kitchen sink strainer must be cleaned whenever it catches anything. Strainers placed in a bathtub can be cleaned periodically.

You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or heat less efficiently.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double-check that there is no splash waiting for you. Then triple and quadruple check.

Treating your drains every month is a great way to avoid future clogs and other problems, and it’s a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.

If you have a foul odor coming from your garbage disposal, this is due to food debris buildup. You need to put ice cubes, orange peels, and lemon peels into the disposal and run for about 30 seconds. Next, run some liquid dish soap through the disposal. This should take care of the problem if there is not a substantial blocking buildup.

To protect your money from unsavory plumbers, always get a written estimate before paying a cent or committing to a project. Good businessmen know to under-promise and over-deliver to savvy customers. Once a stated number is given, it is highly unlikely that your plumber will exceed the projected costs of the project.

When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.

When searching for a good plumber you should always check references. It is easy to just go with the lowest price, but you have to do your research and make sure the plumber has a good reputation with the people they have done work for in the past so you do not get a bad plumber.

Rarely used valves can fuse together. You have to turn them often to avoid sticking and keep penetrating them with oil.

Plumbing can incredibly fickle and being left with a huge plumbing bill or water damage can be disappointing, to say the least. Do yourself a favor and follow these tips to start fixing and installing your own plumbing.