Effectively Choose A Reliable Plumber In Your Area
Maintaining and repairing your own plumbing is an essential part of home improvement, but understanding it and buying the right equipment can be tricky. There are lots of things to consider for your particular plumbing job. Here are some steps you can take to ensure you get started with your own plumbing jobs.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut-off valves near where you are working. This will save a great deal of hardship later on.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. The last resort is to wrap the pipe in rags and pour boiling water over it.
Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.
Find a better way to discard cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or another metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.
Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.
Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or heat less efficiently.
Always keep your garbage disposal clean. You can do this in many ways. Pour some dish soap in and let the disposal run for a few minutes with some cold water. Be sure to run it regularly, if not, it can cause rust. To eliminate foul odors, grind lemon or other citrus peels. You can clean the walls of the disposal by grinding small fruit pits or eggshells.
Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.
As you read, plumbing can be an incredibly important aspect of your current and future home improvement and so is understanding all the different techniques and equipment. This is so it makes it easier for you to understand what you need for your plumbing jobs. Following the tips in this article is a very good starting place.