When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

Avoiding frozen pies is easy if you ensure no area of your house ever falls below freezing and that any pipes which are exposed to such temperatures are protected with insulation. Pipes will begin to freeze as soon as they reach freezing temperatures. In the best case scenario, you will have to wait until they thaw so that the water runs again. The worst case would be that they burst, creating water damage and a big repair bill.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

Before embarking on a plumbing project, make sure that you’re aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you’ll be able to stop the water flow.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

Sometimes in the case of minor and or major emergencies we all have to become Mr. Fix it ourselves. If you’ve got blockage in your drains the first step is to try a commercial de-clogger like Drano. Simply pour it down the drain, wait ten minutes, and presto, your drain should be clear.

It is a general rule of thumb that you should replace a water faucet every seven years, even if you do not see anything wrong with it. Some faucet problems are not visible to the naked eye, which is why it is so important for them to replaced every so often.

To avoid water damage to walls in the kitchen, make sure all seams in your counter tops and back splash are properly sealed using a waterproof silicone. Silicone will dry out over time, crack and shrink and should be replaced once every three years. Keeping your silicone in good shape will keep kitchen spills where they belong and not running down the walls.

When replacing any PVC type pipes in your home, make sure you buy the correct PVC for the job. PVC comes in several different sizes and grades as well as for different temperature applications. If the water going through the pipes is headed for the kitchen or bathroom, or is for laundry or gardening usage, it must be labeled as “Potable.”

It should not be necessary to call out a professional for every repair job. If you take your time and apply sensible advice, such as what you read here, you can successfully repair many of the common faults that develop. It may take a longer the first few times, but after a few successes you will pick up speed.