Learn some pointers that can aid you in best maintaining and repairing your own pipes. You can figure out every little thing you require to not fall for unneeded tools and expenditures as well as just how to save cash by doing it all yourself. It’s not so terrifying once you recognize the essentials of pipes.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drains from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to the sinks and the tub to prevent water from freezing in the drain trap.

Knowing which tools to use and how you should use them is an important skill when it comes to plumbing. Research the project you are going to attempt online, and read the manuals that come with the tools before you use them. Have everything you need by way of tools and information before you attempt a repair on your own.

Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times before the clog is cleared so don’t give up!

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

Keep the drains in your bathtub working properly by pouring a cup’s worth of baking soda and than a cup’s worth of vinegar directly down your drain every month. Cover the drain with an old rag, because there will be a chemical reaction taking place inside the pipes. Wait until the chemical reaction runs its course, then flush the pipes by pouring in a kettle full of boiling water. This simple solution can break up clogs caused by everything from hair to soap scum.

There are many ways to unclog a drain. You can try plunging it at first. If that doesn’t work try using a chemical agent from the store. Before you go and spend money at the store though if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

As you can see, maintaining and repairing your own plumbing isn’t as difficult as it may appear at first glance. It just requires doing research, getting documents in order and asking a lot of questions. The work will pay off once you see how it can help save you money.