Simple plumbing issues can not only hurt the image of your home but they can destroy your wallet. Simple things from clogged drains, to more advanced leaks, can be incredibly destructive. Don’t fret, however! With a few essential tips for the do-it-yourself home plumber, you will be ready to take care of any issue.

Water hammer problems, pipe noise due to water hitting the back of the pipe, can be easily repaired. Exposed pipes will have to be anchored. Get a professional to anchor any hidden pipes if you do not wish to do some work in your floors or walls by yourself.

If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.

Many people deal with clogged toilets. However, if your toilet will not flush every time, the water rises to the top, and there is a bubbling effect occasionally, this can be due to a much deeper blockage in the main pipe. The main pipe must then be cleaned in order for your toilet to work properly.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Everyone in your home should know where the main water shut-off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.

Do you have a frozen drainpipe? You can use a garden hose to thaw it out. First of all, remove the trap from the drainpipe and insert the hose until it will not go any further. While lifting up the other end of the hose, pour hot water down it. Keep pouring hot water down the hose until the drainpipe thaws. To save time with cleanup, keep a bucket underneath to catch the water that overflows.

To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need to be replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.

While it is possible to do plumbing activities yourself, it is generally not recommended. If you are not sure of what you are doing, then you must hire a professional. This will help to ensure you don’t make a bigger mess of the small problem that your plumbing previously had.

If water is flowing out from where your meter is located, a professional is required to come out and fix the leak. If your water bill goes up, this is most likely because the leak is on the house side of the water meter. You will need to get a professional to come out and fix the leak.

Plumbing can be an advanced, highly technical profession where more often than not, you need an expert’s help. However, sometimes that is not the case and there are some simple do-it-yourself home fixes. If you take a little time to read about them you will find some of the most common plumbing problems are able to be handled by the common man.