Plumbing issues are a headache for people who don’t know how to fix them. There are, of course, licensed plumbers, but they usually can’t come to your house right away and charge an arm and a leg to fix simple issues. The following tips will help you solve your plumbing problems.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

Don’t pay a plumber until the job is completed. A plumber may require some money upfront, but it’s wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.

Don’t skimp on quality when it’s time to replace that shower head. There are some who think that low price is all that matters when buying fixtures for the bathroom. Like many cheap products, however, cheap shower heads are often not durable.

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

While you may not always have your choice of plumbers, you can use the Internet to research and review plumbers in your area. Your insurance provider may contract with a specific plumber; if you are knowledgeable about the company’s past jobs and client reviews, you will be more prepared.

Be certain that your toilet does not leak. To check, squeeze a few food coloring drops in the toilet tank. If you see the coloring after a few seconds, you will know that there is a problem with your toilet that needs immediate attention.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

Check for standing water in your yard which can be a direct result of leaking pipes. Standing water can cause an increased level of damage to your lawn and will attract bacteria and insects. Reduce your level of standing water to put your family and home in the most secure position.

Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.

It is important to clean your faucet’s aerator from time to time. Not cleaning it can cause lime buildup, which in turn, could cause water leaks or low water pressure. To clean a aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!.