Plumbing Tips You Can Do Yourself
If you are completely new to the world of plumbing, then you are probably thinking that some tips on plumbing will help you immensely so that you can begin maintaining your own at home. Listed below are some tips to get you started with your home plumbing maintenance and repair.
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. The last resort is to wrap the pipe in rags and pour boiling water over it.
To prevent the pipes from freezing, it is advisable to seal off air vents, cracks, and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event, a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
Do not put any oil, fat, or greasy foods or products in your sink. When they cool, they will harden and create clogs in your drains. A garbage disposal can even become clogged by hardened grease and it will not run at optimum speed and efficiency. Dispose of your oils in a coffee can or other suitable container instead of your sink.
If your home has a well for water and there are pink or orange stains in the sinks and tubs, this could be due to high iron content in your water. Luckily, you can quickly fix this by adding some water softener to your supply. You can pick up this product at a lot of stores, or have it shipped out to you.
Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!
Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.
Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face plumbing problems during the winter. This precaution will save time, money and effort.
Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there’s a place to recycle it near your home.
Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.
When looking for a plumber, you have quite a few options. Ask friends for recommendations of who they use. Check online for plumbers with good reviews and references. Use your yellow pages and look under “Plumbing Contractors” or “Plumbing, Drain, and Sewer Cleaning”. Make sure that you contact more than one plumber before making a choice.
As you can see from the above list of tips, maintaining and repairing your own plumbing can be very time and money-saving in the long run if you know what you are doing. After following these tips, you will no longer be new to plumbing, but you will become a plumbing expert.