You may not know this, but plumbing is actually a fairly simple concept when approached correctly. Once you have a good understanding of how everything works, then even the largest projects will appear to be a lot more simple. Read on for more great advice about plumbing in your home.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.

It is advisable to have a septic tank pumped every five years to keep it in peak condition. Septic systems can back up when the septic tank builds up sediment. This can even result in the septic system failing altogether. Although it could cost a good deal of money to pump out your septic tank, it will cost a lot more having to clean sewage backup or having to fix or replace a septic tank.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition but can be avoided if you know how to dispose of items correctly.

Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!

If you have a clogged toilet and a plunger is not helping to clear the blockage, if the water level is low, pouring a bucking of boiling water from a height into the toilet bowl could resolve the problem. This procedure can be repeated if the water level again returns to a level that is too low.

If your house uses well water and you start to see orange or pink stains in your tub and other water fixtures, you have too much iron in your water. You should purchase a water softener to use, or ask a local business to make a visit to your residence and resolve the issue for you.

If you have multiple plumbing problems, schedule all of them to be fixed together. Of course, our natural inclination is to handle problems as they arise, but it helps to get everything done at once. Even if you only have one noticeable problem, you can still get a plumber to inspect other areas. Most plumbers charge an hourly fee that can be minimized if there is only one visit to your home.

In conclusion, there is a lot to know about plumbing, but it all ends up being well connected in the end. Build on any knowledge that you already have and you can take care of just about any home improvement project or plumbing issue that you might be faced with.