A good home should have a quality plumbing system. Somethings you can take care of yourself, but other issues will require a professional. The following tips will make it easy to take good care of your plumbing.

If your toilet is slow to flush, add some white vinegar to the overflow tube. White vinegar helps the water from your tank to flow quickly, which will make the toilet flush faster. It is recommended that you use about a quart of the vinegar and let it stay there for at least an hour before flushing.

Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.

Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently, therefore, saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.

The most important plumbing tip you need to know is — how to turn off your home’s main water supply. Once the water is shut off, you can investigate problems and figure out how to resolve them. Walk the family through the house and show them where all the water shut-off valves are, and how to use them.

Try to update your internal toilet components from time to time. If you have to hold down the handle for a long time to flush your toilet, you may need to replace a worn piece. This improvement will help to save a lot of money on your water bill during the year.

Always know in your mind exactly where the valve is that will cut the water off on your property. A water meter should be located on or near it. Toilets sink, and some other fixtures can have cut-off valves of their own. You will want to make your family aware of the location of each valve, and add markings that give directions on how to shut each one off whenever an emergency arises.

Make sure you shut off your main system before leaving your house for a few weeks. The water will stay in the pipes, but this should prevent any further damages in case a leak starts while you are away. Check that your shut-off valve is working properly before you leave.

Insulate your pipes properly. If the temperature drops below fifty-five degrees, your pipes could freeze. This makes pipes extremely fragile and increases the risk of leaks and damages. The pipes inside your house should not freeze but take a look at a plan of your plumbing system to see if you have any pipes outside of your house.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can’t fix it yourself, call a plumber.

As already revealed, there are many useful tips to help you keep your plumbing working well and to prevent common problems. Learning to apply these tips on your own can actually save you a lot of money, and help you in an emergency.